SPIDER Automation | 4×AAA Battery Holder with Cover & ON/OFF Switch | 6V / 4.8V Battery Supply
Product Overview
The SPIDER Automation 4×AAA Battery Holder with Cover and ON/OFF Switch is a compact battery enclosure designed to accommodate four AAA-size cells in a series-connected arrangement. It provides a nominal output of 6V with alkaline batteries or 4.8V with NiMH/NiCd rechargeable batteries, making it suitable for electronic devices and projects designed for these voltage levels.
The holder features a removable sliding battery cover secured with a small locking screw. This enclosure helps keep the installed cells organised and reduces direct exposure to the surrounding environment. An integrated ON/OFF switch allows convenient manual control of power supplied to the connected circuit.
For electrical integration, the holder comes with 15cm pre-attached wire leads with approximately 5mm of tinned wire at the ends. Its compact 60 × 45 × 15mm housing makes it suitable for portable electronics, embedded projects and custom battery-powered equipment.
Technical Features & Construction
- Four-Cell Battery Capacity: Designed to hold four standard AAA-size batteries.
- Series Connection: Connects all four cells in series to provide their combined voltage.
- Sliding Protective Cover: Removable cover helps enclose and organise the installed batteries.
- Locking Screw: Small screw secures the sliding cover in its closed position.
- Integrated ON/OFF Switch: Provides convenient manual power control for the connected device.
- Pre-Attached Wire Leads: Supplied with 15cm wires for external electrical connections.
- Tinned Wire Ends: Approximately 5mm of the wire ends are tinned to facilitate soldering.
- Plastic Housing: Lightweight plastic case with a black finish.
- Compact Construction: 60 × 45 × 15mm body dimensions support installation in space-conscious projects.
Electrical Configuration & Output Details
The holder connects four AAA batteries in a series configuration. The output voltage depends on the chemistry of the installed cells.
| Battery Chemistry | Nominal Voltage per Cell | Total Nominal Output |
|---|---|---|
| Alkaline AAA | 1.5V | 6V |
| NiMH Rechargeable AAA | 1.2V | 4.8V |
| NiCd Rechargeable AAA | 1.2V | 4.8V |
These are nominal battery voltages. Actual voltage varies with battery chemistry, charge condition and load. The holder is a passive battery enclosure and does not regulate or convert the output voltage.
ON/OFF Switch & Power Control
An integrated ON/OFF switch provides a convenient way to control the battery supply to a connected electronic circuit without disconnecting the battery holder wires.
- Manual Switching: Allows the connected project to be switched ON or OFF.
- Convenient Operation: Provides accessible power control directly on the battery enclosure.
- Project Integration: Useful for portable devices and battery-powered circuits requiring manual power control.
The supplier has not specified the switch’s maximum voltage or current rating. Ensure that the connected load remains within the switch’s verified electrical limits.
Protective Cover & Mechanical Construction
The holder features a removable sliding cover that encloses the battery compartment. A small locking screw helps secure the cover and reduces the possibility of it sliding open unintentionally during normal handling.
- Enclosed Battery Compartment: Helps keep the four AAA cells organised inside the housing.
- Sliding Cover Mechanism: Allows access to the battery compartment for cell installation and replacement.
- Screw-Based Locking: Helps retain the cover in its closed position.
- Compact Plastic Body: Supports integration into portable electronic assemblies and project enclosures.
Wire & Connection Details
- Wire Length: 15cm pre-attached leads.
- Wire Termination: Approximately 5mm tinned wire ends.
- Connection Method: Open wire ends can be soldered or connected to suitable circuit terminals.
- Electrical Configuration: Four battery cells connected in series.
- Power Control: Integrated ON/OFF switch.
Wire gauge, wire colour coding and positive/negative lead identification have not been specified in the supplied product information.
Applications
The 4×AAA Battery Holder with Cover and ON/OFF Switch is suitable for portable and embedded electronic projects that require a compact battery enclosure, manual power control and a compatible multi-cell DC supply.
- DIY Electronics Projects: Provides a convenient four-cell battery supply for hobby electronics and custom circuit development.
- Arduino & Microcontroller Projects: Can be used with compatible development boards and circuits that support the available battery voltage and input requirements.
- Portable Electronic Devices: Suitable for compact battery-powered equipment requiring an enclosed AAA battery compartment.
- Robotics Projects: Provides a battery mounting solution for small robots and mobile electronic prototypes with compatible power requirements.
- LED Lighting Projects: Suitable for battery-powered LED circuits designed for the holder’s available output voltage.
- Sensor & Monitoring Circuits: Can supply compatible low-voltage sensing, monitoring and data acquisition circuits.
- Educational Electronics: Useful for school, college and electronics laboratory projects involving battery-powered circuits.
- Wireless Electronic Projects: Can power compatible wireless modules and portable electronic assemblies within their specified voltage requirements.
- Embedded Control Systems: Suitable for custom embedded electronics requiring a compact battery source and manual power switching.
- Battery-Powered Prototypes: Useful for developing portable electronic prototypes with replaceable AAA battery cells.
Package Contents
- 1 × 4×AAA Battery Holder
- Integrated Sliding Cover: With locking screw.
- Integrated ON/OFF Switch
- Pre-Attached Wire Leads: 15cm with approximately 5mm tinned ends.
Note: AAA batteries are not included in the package.
Product Specifications
| Parameter | Specification |
|---|---|
| Product Type | AAA Battery Holder with Cover and Switch |
| Battery Size | AAA |
| Cell Quantity | 4 Cells |
| Internal Connection | Series |
| Alkaline Battery Output | 6V Nominal |
| NiMH / NiCd Battery Output | 4.8V Nominal |
| Case Material | Plastic |
| Cover Type | Removable Sliding Cover |
| Cover Locking | Locking Screw |
| ON/OFF Switch | Yes |
| Cable Length | 15cm |
| Tinned Wire End Length | Approximately 5mm |
| Colour | Black |
| Length | 60mm |
| Width | 45mm |
| Height | 15mm |
| Dimensions (L × W × H) | 60 × 45 × 15mm |
| Product Weight | 19g |
| Shipping Weight | 0.022kg |
| Shipping Dimensions | 10 × 7 × 2cm |
Connection & Operating Recommendations
- Battery Selection: Install four compatible AAA cells of the same chemistry and preferably similar charge condition.
- Voltage Compatibility: Confirm that the connected device supports 6V alkaline operation or 4.8V nominal rechargeable-cell operation, as applicable.
- Battery Polarity: Follow the polarity markings inside the battery compartment when installing cells.
- Power Control: Use the integrated ON/OFF switch to control power to the connected circuit.
- Wire Connection: Identify the positive and negative leads before connecting them to the circuit. Wire polarity is not specified in the supplier information.
- Soldering: Use suitable soldering tools and avoid excessive heat on the tinned wire ends and insulation.
- Cover Securing: Close the sliding cover properly and secure the locking screw after installing the batteries.
- Electrical Protection: Ensure that the connected circuit and wiring are suitable for the expected voltage and current requirements.
