SPIDER Automation | Bonka 3S 11.1V 10000mAh 25C Lithium Polymer Battery Pack | High-Capacity Power for FPV & RC Systems
Product Overview & Battery Technology
The Bonka 11.1V 10000mAh 25C 3S Lithium Polymer Battery Pack is designed to provide rechargeable power for compatible radio-controlled platforms, FPV systems and robotics applications. Its three-cell series configuration delivers an 11.1V nominal voltage, while its 10000mAh capacity provides substantial stored energy for equipment designed around this battery specification.
With a 25C discharge rating, this battery is intended for applications requiring a suitable combination of energy capacity and power delivery. Its physical dimensions of 160 × 60 × 40mm should be considered when checking battery compartment clearance and mounting arrangements before installation.
The pack features an XT60 discharge connector for the main power connection and a JST-XH balance connector for cell-balancing operations. These connectors serve separate functions and should be connected only to compatible equipment and charging interfaces.
Bonka lithium polymer batteries are designed for radio-controlled applications where battery configuration, capacity, discharge rating and connector compatibility are important selection criteria. This 3S battery pack can be considered for compatible FPV drones, RC cars, airplanes, helicopters, multirotors and robotics systems.
Technical Features & Performance Characteristics
- 11.1V Nominal Voltage: The three-cell series configuration provides an 11.1V nominal output for equipment designed to operate with a 3S LiPo battery.
- 3S Cell Configuration: Three lithium polymer cells are connected in series to form the battery pack.
- 10000mAh Capacity: Provides substantial rated energy-storage capacity for compatible equipment and power systems.
- 25C Discharge Rating: Identifies the specified discharge rating of the battery. Actual operating performance depends on load conditions, battery condition and the manufacturer’s rating criteria.
- XT60 Main Discharge Connector: Provides the primary electrical interface for connecting the battery to compatible power systems.
- JST-XH Balance Connector: Provides individual cell connections for balancing through a compatible LiPo balance charger.
- 160 × 60 × 40mm Dimensions: Provides defined physical measurements for checking installation clearance and battery compartment compatibility.
- FPV and RC System Suitability: Intended for compatible radio-controlled platforms and electronic equipment requiring a 3S 11.1V battery supply.
Performance Advantages
- High Energy Storage Capacity: The 10000mAh rating provides substantial stored energy for applications designed around this capacity.
- Application-Specific Voltage: The 3S configuration supports equipment designed for an 11.1V nominal LiPo battery supply.
- Dedicated Connector Interfaces: The XT60 discharge connector and JST-XH balance connector provide separate interfaces for power delivery and cell balancing.
- Specified Discharge Rating: The 25C rating helps users evaluate the battery against the discharge requirements of compatible equipment.
- Installation Planning: Clearly specified dimensions help determine whether the pack can be accommodated within the intended equipment.
Industrial, Commercial & RC Applications
- FPV Drone Systems: For compatible FPV platforms designed to operate with a 3S 11.1V battery supply.
- RC Cars: For radio-controlled vehicles with matching voltage, discharge, connector and battery-space requirements.
- RC Airplanes: For compatible fixed-wing radio-controlled aircraft requiring a 3S LiPo battery.
- RC Helicopters: For helicopter systems designed around the specified battery voltage and capacity.
- Multirotor Platforms: For compatible multirotor configurations with suitable battery mounting space and electrical requirements.
- Robotics Systems: For mobile robotics and other equipment requiring a compatible rechargeable 11.1V power source.
- Electronic Power Systems: For compatible battery-powered equipment designed for a 3S Lithium Polymer pack.
Package Contents
- 1 × Bonka 11.1V 10000mAh 25C 3S Lithium Polymer Battery Pack
Product Specifications
| Parameter | Specification |
|---|---|
| Brand | Bonka |
| Battery Chemistry | Lithium Polymer (LiPo) |
| Nominal Voltage | 11.1V |
| Configuration | 3S (3 cells in series) |
| Capacity | 10000mAh |
| Discharge Rate | 25C |
| Balance Connector | JST-XH |
| Discharge Connector | XT60 |
| Length | 160mm |
| Width | 60mm |
| Height | 40mm |
| Shipping Dimensions | 19 × 7 × 6cm |
Charging, Connection & Operating Recommendations
- Verify Battery Compatibility: Confirm that the equipment supports a 3S 11.1V nominal LiPo battery and can accommodate the pack’s 160 × 60 × 40mm dimensions.
- Use a Compatible Balance Charger: Charge the battery using a charger with a suitable 3S LiPo mode and compatible JST-XH balance connection.
- Use the Correct Connector: Connect the XT60 plug to the compatible main power interface and the JST-XH plug to the balance-charging interface.
- Check Polarity and Wiring: Verify connector polarity and equipment wiring before making electrical connections.
- Follow LiPo Safety Practices: Avoid short circuits, overcharging, deep discharge and physical damage. Follow the manufacturer’s charging, storage and handling instructions.
