SPIDER Automation | A2212 1400KV Brushless Motor, SimonK 30A ESC & 1045 SF Propeller Combo | Complete Multirotor Propulsion Set
Description
The A2212 1400KV Brushless Motor with SimonK 30A ESC and 1045 SF Propeller Combo Set is a coordinated propulsion package for compatible quadcopters, multirotors, RC aircraft and UAV platforms. It combines an A2212 brushless motor with a 1400KV speed constant, a SimonK 30A electronic speed controller and a pair of black 1045 SF propellers. The motor is specified for 2S–3S LiPo battery systems and has a listed maximum power rating of 180W.
The A2212 motor features a 14-pole configuration, 3.17mm shaft, 65mΩ internal resistance and 80% maximum efficiency. Its listed current capacity is 16A for 60 seconds, with a no-load current of 0.7A at 10V. A pre-soldered connector is provided for ESC connection. The included SimonK ESC has a 30A constant-current rating, a listed 40A maximum-current rating and an integrated 3A BEC.
The propeller set consists of two 1045 (10 × 4.5-inch) SF propellers, one clockwise and one counter-clockwise. The package also includes four propeller adapters, an X-type motor holder with mounting screws and two sets of propeller reducers. The reducer sets provide multiple listed bore sizes to support different compatible propeller-hub configurations.
A2212 1400KV Brushless Motor – Design & Performance
The A2212 brushless motor is the primary propulsion component of this package. Its 1400KV rating indicates a nominal no-load speed constant of 1400 RPM per volt. The motor has a 14-pole configuration and is specified for 2S–3S LiPo operation. Its stated maximum power is 180W, while the listed current capacity is 16A for 60 seconds.
- A2212 Motor Format: Compact brushless outrunner configuration for compatible multirotor installations.
- 1400KV Speed Constant: Nominal speed constant of 1400 RPM per volt under no-load reference conditions.
- 10T/13T Designation: The source identifies the motor as a 10T/13T variant; confirm the actual winding version before final system selection.
- 14-Pole Construction: Motor specification lists a 14-pole configuration.
- Maximum Power: Listed at 180W.
- Current Capacity: 16A for 60 seconds as specified in the source.
- No-Load Current: 0.7A at 10V.
- Maximum-Efficiency Current: Listed operating range of 6–12A.
- Maximum Efficiency: 80% source-listed maximum efficiency.
- Internal Resistance: 65mΩ.
- Motor Shaft: 3.17mm diameter.
- Pre-Soldered Connector: Motor is supplied with pre-soldered connectors for ESC connection.
- Motor Dimensions: Listed length of 27.5mm and width of 26.5mm.
- Motor Weight: 62g as specified.
SimonK 30A Brushless Electronic Speed Controller
The included SimonK 30A ESC controls the electrical power supplied to the brushless motor in response to compatible control signals. It is specified for 2S–3S LiPo battery systems and has a 30A constant-current rating. The source also lists a 40A maximum-current rating and an integrated 3A BEC.
- ESC Type: Brushless electronic speed controller.
- Firmware: SimonK.
- Constant Current Rating: 30A.
- Maximum Current Rating: 40A as listed in the source; the duration and test conditions are not provided.
- Integrated BEC: Built-in battery eliminator circuit.
- BEC Current Rating: 3A as specified.
- Battery Compatibility: 2S–3S LiPo.
- Motor Control: Electronic speed regulation for a compatible brushless motor.
- System Integration: Intended for use with compatible brushless motors and control electronics.
1045 SF Propellers – Aerodynamic Configuration
The package includes a pair of black 1045 SF propellers, with a nominal diameter of 10 inches and a pitch specification of 4.5 inches. One propeller is identified as CW and the other as CCW, supporting a multirotor configuration that requires opposite propeller rotation directions.
- Propeller Designation: 1045 SF.
- Nominal Diameter: 10 inches (254mm).
- Pitch: 4.5 inches.
- Propeller Quantity: Two blades supplied as one CW and one CCW.
- Material: Propeller material is not identified in the supplied specifications.
- Colour: Black.
- Listed Weight: 14g; the source does not clarify whether this is per propeller or per pair.
- Hub Interface: 6mm shaft/bore dimension is listed in the source; confirm the measurement against the actual propeller hub before fitting.
- Reducer Compatibility: Two sets of reducers are included to support the listed hub-bore sizes.
- Surface Finish: The source describes an epoxy-resin cover.
Propeller Adapters, Reducers & Motor Mounting Hardware
The package includes additional mechanical components for motor fitting and propeller installation. Four propeller adapters, an X-type motor holder with screws and two sets of propeller reducers are supplied. The reducers are listed in multiple sizes to accommodate compatible propeller-hub interfaces.
- Propeller Adapters: Four adapters are included.
- X-Type Motor Holder: One motor holder is supplied for compatible mounting arrangements.
- Mounting Screws: A set of screws is included with the motor holder.
- Reducer Sets: Two sets of propeller reducers are included.
- Reducer Sizes: Listed sizes are 2.75mm, 3mm, 3.17mm, 4mm, 4.70mm, 5mm, 6mm and 6.25mm.
- Motor Shaft Reference: The A2212 motor has a listed 3.17mm shaft diameter.
- Propeller Hub Matching: Select the reducer that matches the actual motor adapter and propeller hub dimensions.
Electrical Compatibility & System Integration
The motor and ESC are both specified for 2S–3S LiPo battery configurations. Correct integration requires matching battery voltage, ESC capability, motor loading and propeller configuration. The ESC’s 3A BEC is intended to provide power to compatible control electronics, subject to the receiver or flight controller’s input-voltage and current requirements.
- Battery Configuration: 2S–3S LiPo for the motor and ESC.
- Motor Speed Constant: 1400KV.
- Motor Maximum Power: 180W as listed.
- Motor Current Capacity: 16A for 60 seconds.
- ESC Continuous Rating: 30A constant current as listed.
- ESC Maximum Rating: 40A maximum current as listed; duration is not established.
- BEC Current: 3A source-listed output-current rating; BEC output voltage is not provided.
- Motor Connector: Pre-soldered connector supplied; connector family and gender are not identified.
- Propeller Direction: One CW and one CCW propeller supplied.
- Propeller Size: 1045 SF, 10 × 4.5-inch configuration.
Applications
This combo set is intended for compatible brushless propulsion installations where the A2212 motor, SimonK ESC and 1045 propeller pair can be integrated with the aircraft’s frame, battery and control system.
- Quadcopter Assembly: Propulsion component integration in compatible quadcopter platforms.
- Multirotor Development: Brushless propulsion evaluation for multirotor aircraft designs.
- UAV Prototyping: Component-level propulsion integration in suitable UAV development platforms.
- RC Aircraft: Use in compatible radio-controlled aircraft where motor and propeller loading are appropriate.
- Flight Controller Integration: ESC and BEC integration with compatible flight-control electronics.
- 2S LiPo Propulsion Systems: Use in compatible two-cell LiPo-powered motor configurations.
- 3S LiPo Propulsion Systems: Use in compatible three-cell LiPo-powered motor configurations.
- 1045 Propeller Systems: Propulsion testing with compatible 10 × 4.5-inch SF propellers.
- CW/CCW Propeller Arrangements: Integration of the supplied opposite-rotation propeller pair in suitable aircraft configurations.
- Brushless ESC Evaluation: Testing compatible SimonK ESC control and motor response.
- Motor Replacement: Replacement of compatible A2212-format 1400KV motor assemblies after checking shaft, mounting and connector interfaces.
- Multirotor Frame Integration: Installation using compatible motor holders and frame mounting provisions.
- Propeller Adapter Evaluation: Selection and testing of compatible adapters and reducers for the propeller hub.
- Propulsion Bench Testing: Controlled evaluation of motor current, speed and propeller load.
- Custom UAV Powertrain Development: Component selection and testing for compatible brushless propulsion architectures.
Package Includes
- 1 × A2212 1400KV 10T/13T Brushless DC Motor with Pre-Soldered Connector
- 4 × Propeller Adapters
- 1 × X-Type Motor Holder
- 1 × Set of Motor Holder Mounting Screws
- 1 × SimonK 30A Brushless ESC
- 2 × 1045 (10 × 4.5-inch) SF Propellers – 1 CW and 1 CCW
- 2 × Sets of Propeller Reducers
Product Specifications
A2212 1400KV Brushless Motor
| Parameter | Specification |
|---|---|
| Motor Type | Brushless DC Outrunner |
| Model | A2212 10T/13T |
| KV Rating | 1400KV |
| Nominal Speed Constant | 1400 RPM/V (no-load reference) |
| Pole Count | 14 Poles |
| Maximum Power | 180W |
| Current Capacity | 16A for 60 seconds |
| No-Load Current | 0.7A at 10V |
| Maximum-Efficiency Current | 6–12A |
| Maximum Efficiency | 80% |
| Internal Resistance | 65mΩ |
| Compatible Battery | LiPo |
| Battery Configuration | 2S–3S |
| Shaft Diameter | 3.17mm |
| Motor Length | 27.5mm |
| Motor Width | 26.5mm |
| Motor Weight | 62g |
| Motor Connector | Pre-soldered connector; connector type not identified |
SimonK 30A Brushless ESC
| Parameter | Specification |
|---|---|
| ESC Type | Brushless Electronic Speed Controller |
| Firmware | SimonK |
| Constant Current | 30A |
| Maximum Current | 40A (duration not provided) |
| BEC Type | Integrated BEC |
| BEC Current Rating | 3A |
| Compatible Battery | LiPo |
| Battery Configuration | 2S–3S |
1045 SF Propellers
| Parameter | Specification |
|---|---|
| Propeller Designation | 1045 SF |
| Propeller Diameter | 10 inches / 254mm |
| Pitch | 4.5 inches |
| Quantity | 2 (1 CW + 1 CCW) |
| Colour | Black |
| Listed Weight | 14g (per-item basis not clarified) |
| Hub Diameter Reference | 6mm as listed; verify against the actual propeller hub |
| Reducer Sizes | 2.75mm, 3mm, 3.17mm, 4mm, 4.70mm, 5mm, 6mm and 6.25mm |
| Surface Finish | Epoxy-resin cover as described in the source |
Included Mechanical Accessories
| Parameter | Specification |
|---|---|
| Propeller Adapters | 4 pieces |
| Motor Holder | X-type motor holder |
| Mounting Hardware | Set of screws for motor holder |
| Propeller Reducers | 2 sets |
Installation & Operating Recommendations
- Verify Battery Voltage: Use a compatible 2S–3S LiPo battery and confirm the ESC and motor voltage requirements before connecting the system.
- Check Motor Current: The motor is listed for 16A over 60 seconds. Do not treat this as an unlimited continuous-current rating.
- Match the ESC: Confirm the ESC’s 30A constant-current rating and operating conditions against the actual motor load.
- Check the 40A ESC Rating: The source does not state the duration of the 40A maximum-current figure. Do not assume it is a continuous rating.
- Verify BEC Voltage: The BEC current is listed as 3A, but its output voltage is not provided. Confirm compatibility with the receiver and flight controller before connection.
- Inspect Motor Connectors: Confirm connector type, polarity and physical fit before connecting the pre-soldered motor leads to the ESC.
- Match Propeller Reducers: Select reducer sizes according to the measured propeller hub and adapter interfaces; do not assume every reducer is suitable for every combination.
- Check Propeller Direction: Install the CW and CCW propellers in the correct positions according to the aircraft’s motor rotation and flight-controller configuration.
- Secure the Motor Holder: Use compatible mounting points and the supplied screws. Confirm screw length and clearance before tightening.
- Check Propeller Clearance: Ensure the propeller rotates freely without contacting the frame, wiring or adjacent components.
- Perform a Controlled Test: Verify motor direction, ESC response and current draw under controlled conditions before flight operation.
- Monitor Operating Temperature: Check motor and ESC temperature during initial tests and after changing battery or propeller configurations.
