SPIDER Automation | 2×AA Battery Holder with Cover, ON/OFF Switch & Locking Screw | Series Connection
Product Overview
The SPIDER Automation 2×AA Battery Holder with Cover and ON/OFF Switch is a compact battery enclosure designed to accommodate two AA-size cells in a series configuration. It provides a convenient battery power arrangement for electronic circuits, DIY projects, embedded systems and other battery-operated applications.
The holder features a removable sliding cover secured by a small locking screw. This enclosed construction helps keep the installed battery cells organized and reduces their exposure to direct contact with the surrounding environment. The black plastic body offers a neat and practical enclosure for battery-powered assemblies.
An integrated ON/OFF switch allows convenient manual control of power to the connected circuit. The holder is supplied with approximately 15cm pre-attached wire leads, with around 5mm of tinned wire at the ends for soldering and electrical connections.
Technical Features & Construction
- Two AA Battery Positions: Accommodates two standard AA-size cylindrical batteries.
- Series Internal Connection: Connects the two battery cells in series to combine their output voltage.
- Removable Sliding Cover: Provides access to the battery compartment for cell installation and replacement.
- Locking Screw Mechanism: A small screw helps secure the sliding cover in position.
- Integrated Power Switch: Built-in ON/OFF switch allows manual control of the connected circuit’s power supply.
- Pre-Attached Wire Leads: Supplied with approximately 15cm wires for connecting the holder to an electronic circuit.
- Tinned Wire Ends: Approximately 5mm of the wire ends are tinned to facilitate soldering.
- Black Plastic Enclosure: Provides a compact housing for the battery cells and associated connections.
- Compact Dimensions: The 70×35×20mm body supports integration into space-conscious electronic projects.
Electrical Configuration & Output Details
The two AA battery positions are internally connected in series (2S). The total nominal output voltage depends on the chemistry of the installed cells.
- With Alkaline Batteries: Two 1.5V AA cells provide approximately 3V nominal output.
- With NiMH/NiCd Rechargeable Batteries: Two 1.2V cells provide approximately 2.4V nominal output.
- Power Control: The integrated ON/OFF switch controls the power supplied to the connected circuit.
- Output Connection: Electrical connection is provided through the pre-attached wire leads.
Important: The battery holder does not regulate or stabilize the output voltage. Actual voltage varies with battery chemistry, state of charge and load conditions. Select a compatible power supply arrangement according to the connected device’s voltage requirements.
Cover, Locking Mechanism & Battery Installation
- Sliding Cover Design: The removable cover allows access to the battery compartment without requiring permanent disassembly.
- Screw-Based Locking: A small locking screw secures the cover and helps prevent unintended opening.
- Enclosed Battery Compartment: The cover helps shield the battery cells from direct contact with dust and surrounding objects, but no waterproof or IP protection rating is specified.
- Convenient Battery Replacement: The sliding cover allows installed AA cells to be accessed and replaced when required.
Wire Leads & Connection Details
- Wire Length: Approximately 15cm.
- Wire Termination: Approximately 5mm of tinned wire at each lead end, as specified by the supplier.
- Connection Method: Suitable for soldering or connecting to compatible circuit terminals.
- Power Switching: The integrated ON/OFF switch provides manual control of the holder’s output.
Wire colour, polarity identification, conductor gauge and maximum current rating are not specified. Confirm the electrical connections before integrating the holder into a circuit.
Applications
This 2×AA battery holder is suitable for electronic projects that require a compact battery enclosure, series-connected power output and convenient manual ON/OFF control.
- DIY Electronics Projects: Battery power arrangement for custom electronic circuits and hobby projects.
- Arduino-Compatible Circuits: Power source for compatible development boards or associated circuits designed for the available voltage range.
- Microcontroller Projects: Battery supply for suitable microcontroller-based electronic systems.
- Embedded Electronics: Compact battery housing for low-voltage embedded circuit assemblies.
- Educational Electronics: Useful for practical circuit-building, battery connection and electronics learning activities.
- Portable Electronic Devices: Battery enclosure for compatible portable devices requiring a two-cell AA supply.
- Sensor Circuits: Power arrangement for suitable low-voltage sensor and monitoring circuits.
- LED Projects: Battery supply for compatible LED circuits designed for the available output voltage and current.
- Wireless Control Projects: Power source for suitable wireless control and remote electronic assemblies.
- Robotics Electronics: Battery supply for compatible robot control circuits and low-voltage electronic subsystems.
- DIY Instrumentation: Power arrangement for portable electronic measurement and monitoring projects.
- Battery-Powered Prototypes: Convenient battery housing for testing and developing compatible electronic prototypes.
Package Contents
- 1 × 2×AA Battery Holder: Black plastic enclosure with sliding cover, locking screw, integrated ON/OFF switch and approximately 15cm wire leads.
Product Specifications
| Parameter | Specification |
|---|---|
| Product Type | 2×AA Battery Holder with Cover and ON/OFF Switch |
| Battery Compatibility | AA-Size Cells |
| Number of Battery Cells | 2 |
| Internal Connection | Series (2S) |
| Nominal Output Voltage (Alkaline) | 3V (2×1.5V cells) |
| Nominal Output Voltage (NiMH/NiCd) | 2.4V (2×1.2V cells) |
| Battery Cover | Removable Sliding Cover |
| Cover Locking Mechanism | Small Locking Screw |
| ON/OFF Switch | Yes, Integrated |
| Wire Length | Approximately 15cm |
| Wire End Preparation | Approximately 5mm Tinned Ends |
| Case Material | Plastic (specific grade not provided) |
| Colour | Black |
| Product Dimensions | 70×35×20mm (L×W×H) |
| Product Weight | 19g |
| Shipping Weight | 0.022kg |
| Shipping Dimensions | 10×4×2cm |
| Package Contents | 1× 2×AA Battery Holder with Cover and ON/OFF Switch |
Connection & Operating Recommendations
- Insert Batteries Correctly: Install two AA cells according to the polarity markings inside the battery compartment.
- Use Matching Battery Types: Use compatible cells of the same chemistry, capacity and charge condition.
- Check Operating Voltage: Select alkaline or rechargeable cells according to the voltage requirements of the connected circuit.
- Operate the Power Switch: Use the integrated ON/OFF switch to control power to the connected electronics.
- Secure the Cover: Close the sliding cover and tighten the locking screw appropriately after installing the batteries.
- Confirm Wire Polarity: Identify the positive and negative leads before soldering or connecting them to the circuit.
- Observe Electrical Ratings: Switch current rating, wire gauge and maximum holder current are not specified. Ensure the connected load is within the suitable operating limits.
- Keep the Compartment Dry: The holder has no specified waterproof or IP protection rating; avoid exposure to moisture.
