SPIDER Automation | 3.7V 300mAh Micro Li-Po Battery | PCM Protected Compact Rechargeable Cell
The 3.7V 300mAh Micro Li-Po Battery is a single-cell Lithium Polymer rechargeable battery designed for portable electronic products, IoT devices and embedded applications. Its compact construction provides an integrated power source for electronic assemblies where battery capacity, installation space and overall weight are important design considerations.
The battery incorporates an integrated Protection Circuit Module (PCM) and provides a nominal 3.7V supply. Its 300mAh rated capacity and specified 0.2C discharge rate make it suitable for compatible low-current battery-powered systems. The charging circuit and connected load should be selected according to the battery’s electrical characteristics and application requirements.
Technical Features & Functional Characteristics
- Single-Cell Lithium Polymer Design: Provides a rechargeable power source for electronic products designed around a single-cell Li-Po voltage range.
- 300mAh Energy Storage Capacity: Supports portable and compact electronic applications requiring rechargeable energy storage.
- Integrated PCM Protection: Includes a Protection Circuit Module within the battery assembly.
- Specified 0.2C Discharge Rate: Defines the stated discharge rate relative to the battery’s rated capacity.
- Compact Battery Construction: The 30 × 20 × 6mm form factor supports integration into small electronic enclosures.
- Lightweight Construction: Helps limit the battery’s contribution to the overall weight of portable equipment.
- Rechargeable Operation: Designed for repeated charging and discharging using a compatible Li-Po charging system.
Electrical Configuration & Charging Information
This battery uses a single-cell Lithium Polymer configuration with a nominal voltage of 3.7V. A fully charged conventional single-cell Li-Po battery reaches 4.2V. Charging must therefore be performed using a compatible 4.2V Constant Current / Constant Voltage (CC/CV) charging profile.
The specified 0.2C discharge rate corresponds to a calculated current of 60mA based on the rated capacity. This is a mathematical C-rate conversion and should not be treated as an independently verified continuous-current rating. The integrated PCM is a protection circuit, not a battery charger or voltage regulator.
Applications
The compact dimensions and rechargeable characteristics make this battery suitable for compatible electronic products that require a small onboard power source.
- IoT Devices: Compact sensor nodes, monitoring modules and connected electronic products designed for low-current operation.
- Portable Electronics: Small handheld devices requiring rechargeable energy storage.
- Electronic Gadgets: Compact consumer electronics and custom-designed electronic products.
- Wireless Devices: Battery-powered wireless modules and accessories with compatible voltage and current requirements.
- Electronic Toys: Compact rechargeable power systems for compatible electronic toys.
- Embedded Systems: Microcontroller-based products designed for single-cell Li-Po operation.
- DIY Electronics Projects: Low-current portable prototypes, custom circuits and battery-powered assemblies.
- Compact Sensor Modules: Small sensing products requiring an integrated rechargeable battery.
Package Contents
- 1 × 300mAh PCM Protected Micro Li-Po Battery
Product Specifications
| Parameter | Specification |
|---|---|
| Product Type | Micro Lithium Polymer (Li-Po) Rechargeable Battery |
| Battery Chemistry | Lithium Polymer (Li-Po) |
| Cell Configuration | Single Cell (1S) |
| Nominal Voltage | 3.7V DC |
| Full-Charge Voltage | 4.2V DC |
| Rated Capacity | 300mAh (0.3Ah) |
| Nominal Energy | Approximately 1.11Wh (calculated from nominal voltage × rated capacity) |
| Discharge Rate | 0.2C |
| Calculated Current at 0.2C | 60mA (calculated from rated capacity) |
| Protection Circuit | Integrated PCM Protection |
| Charging Method | Single-cell Li-Po CC/CV charging |
| Charging Voltage | 4.2V DC |
| Recommended Charging Current | Refer to the battery datasheet |
| Cycle Life | 500 cycles |
| Operating Temperature | 0°C to 50°C |
| Length | 30mm |
| Width | 20mm |
| Height / Thickness | 6mm |
| Overall Dimensions (L × W × H) | 30 × 20 × 6mm |
| Weight | 8g |
| Rechargeable | Yes |
| Package Quantity | 1 Battery |
Connection & Operating Recommendations
Use a charging and power-management arrangement specifically designed for a single-cell Li-Po battery. The battery should operate within its specified temperature range, and the connected electronics must be compatible with its voltage and discharge characteristics.
- Use a Compatible Charging Circuit: Charge through a dedicated single-cell Li-Po charger using a 4.2V CC/CV charging profile.
- Select the Appropriate Charging Current: Follow the battery datasheet’s charging-current recommendation. The discharge C-rate does not establish the permitted charging current.
- Observe Battery Polarity: Connect positive and negative terminals correctly. Confirm the wiring or datasheet before making connections.
- Match the Connected Load: Select a load compatible with the battery’s voltage and specified discharge characteristics.
- Avoid Excessive Heat: Keep the battery away from direct sunlight and external heat sources.
- Allow Temperature to Stabilise: Do not charge a battery while it remains warm after use or operate it while it remains warm after charging.
- Disconnect During Extended Non-Use: Disconnect the battery from the equipment where practical when it will remain unused for an extended period.
- Use Suitable Storage: Store the battery in a non-conductive, fire-resistant container, away from metal objects and other conductive materials.
- Prevent Physical Damage: Do not puncture, crush, bend or deform the battery pouch.
