SPIDER Automation | Bonka 6S FPV UPSN Series Racing LiPo Battery – 22.2V, 1800mAh, 200C | High-Rate Power Delivery for FPV & RC Systems
Product Overview & Battery Technology
The Bonka 22.2V 1800mAh 200C 6S FPV UPSN Series Racing Lithium Polymer Battery Pack is designed for compatible FPV and radio-control applications that require a high-discharge battery configuration. Its six-cell series arrangement provides a nominal voltage of 22.2V, while its 1800mAh capacity supplies the rated energy storage for suitable power systems.
With a specified 200C discharge rating, this battery is intended for applications with demanding power-delivery requirements. Actual performance and suitability depend on the connected equipment, electrical load, battery condition and operating conditions. The supplied C-rating is the stated discharge rating; continuous and burst classifications have not been specified.
The battery is equipped with an XT60 discharge connector for the main power output and a JST-XH balance connector for cell balancing. These connectors support use with compatible equipment and balance chargers, provided their electrical requirements and connector configurations match.
Measuring 95 × 55 × 35mm and weighing 345g, the pack provides defined physical specifications for installation and platform weight planning. It is intended for compatible FPV drones, RC cars, airplanes, helicopters, multirotors and other suitable electronic power applications designed for a 6S lithium polymer battery.
Technical Features & Performance Characteristics
- 6S Series Configuration: Uses six lithium polymer cells connected in series to provide a nominal pack voltage of 22.2V.
- 1800mAh Rated Capacity: Provides the specified battery capacity for compatible FPV and RC equipment.
- 200C Discharge Rating: Carries a specified high discharge rating for applications with demanding power requirements. Confirm the manufacturer’s continuous and burst rating details before using this value to establish a system current limit.
- XT60 Main Discharge Connector: Provides the primary power-output connection for equipment fitted with a compatible XT60 connector.
- JST-XH Balance Connector: Provides the balance connection for monitoring individual cell voltages and balancing the pack with a compatible charger.
- 345g Product Weight: The specified battery weight helps with equipment weight calculations and platform planning.
- 95 × 55 × 35mm Dimensions: Provides the physical measurements needed to check battery compartment clearance and mounting space.
- FPV Power Applications: Designed for use in compatible FPV drone and multirotor power systems.
- RC Equipment Compatibility: Suitable for compatible RC cars, airplanes and helicopters where voltage, discharge requirements, connectors and physical fitment match.
- Bonka UPSN Series: Identified as part of the Bonka FPV UPSN Series Racing lithium polymer battery range.
Performance Advantages
- High Specified Discharge Rating: The 200C rating identifies this pack for consideration in demanding power applications, subject to confirmation of its continuous and burst discharge limits.
- 6S Power Configuration: The 22.2V nominal output supports compatible systems designed around a six-cell lithium polymer battery.
- 1800mAh Capacity: Provides the specified capacity for compatible systems, with actual operating duration depending on platform power consumption and load conditions.
- Integrated Balance Connection: The JST-XH connector supports cell-voltage monitoring and balancing when used with an appropriate balance charger.
- Standard XT60 Power Interface: Enables connection to compatible power systems and distribution assemblies.
- Defined Physical Specifications: The supplied dimensions and product weight help users evaluate battery fitment and platform weight requirements.
Industrial, Commercial & RC Applications
- FPV Racing Drones: For compatible FPV platforms designed for 6S battery operation.
- Multirotor Systems: For compatible multirotor power configurations requiring a 22.2V nominal battery.
- RC Cars: For radio-controlled vehicles with suitable voltage, discharge and connector requirements.
- RC Airplanes: For compatible fixed-wing radio-control aircraft power systems.
- RC Helicopters: For compatible helicopter configurations designed around a 6S lithium polymer pack.
- Robotics: For suitable robotic platforms requiring a compatible rechargeable battery power source.
- Electronic Power Systems: For compatible equipment designed to operate within the battery’s electrical specifications.
Package Contents
- 1 × Bonka 22.2V 1800mAh 200C 6S FPV UPSN Series Racing Lithium Polymer Battery Pack
Product Specifications
| Parameter | Specification |
|---|---|
| Brand | Bonka |
| Product Series | FPV UPSN Series Racing |
| Battery Chemistry | Lithium Polymer (LiPo) |
| Nominal Voltage | 22.2V |
| Cell Configuration | 6S |
| Capacity | 1800mAh |
| Discharge Rating | 200C |
| Balance Connector | JST-XH |
| Discharge Connector | XT60 |
| Length | 95mm |
| Width | 55mm |
| Height | 35mm |
| Product Weight | 345g |
| Shipping Weight | 0.39kg |
| Shipping Dimensions | 19 × 7 × 6cm |
Charging, Installation & Operating Recommendations
- Verify Battery Compatibility: Confirm that the connected equipment supports a 6S, 22.2V nominal lithium polymer battery and the required discharge capability.
- Check Connector Compatibility: Ensure the XT60 discharge connector and JST-XH balance connector match the equipment and charger. Verify polarity before connecting.
- Use a Suitable Balance Charger: Charge the pack using a charger designed for 6S lithium polymer batteries and follow the manufacturer’s recommended charging settings.
- Monitor Individual Cell Voltages: Use the balance connection during charging and check cell voltages according to the battery manufacturer’s instructions.
- Follow Safe Battery Handling Practices: Avoid short circuits, punctures, physical damage, excessive heat and operation beyond manufacturer-specified limits. Never leave a charging battery unattended.
