SPIDER Automation | Bonka 4S FPV UPSN Series Racing LiPo Battery – 14.8V, 1800mAh, 200C | High-Discharge Power for FPV & RC Systems
Product Overview & Battery Technology
The Bonka 14.8V 1800mAh 200C 4S FPV UPSN Series Racing Lithium Polymer Battery Pack is designed for compatible FPV drones and radio-controlled systems that require a rechargeable battery with a high stated discharge rating. Its four-cell series configuration delivers a nominal voltage of 14.8V, while the rated capacity of 1800mAh provides stored energy for compatible power systems.
Part of the Bonka UPSN Series, this battery features a stated 200C discharge rate for performance-oriented applications. The C-rating should be evaluated according to the manufacturer’s discharge-rating conditions and the electrical requirements of the connected equipment. The continuous and burst classifications have not been specified.
The pack is equipped with an XT60 discharge connector for the main power connection and a JST-XH balance connector for cell balancing during charging. These connector interfaces support integration with compatible FPV and RC equipment and suitable 4S LiPo charging systems.
With physical dimensions of 85 × 35 × 35mm and a specified product weight of 240g, the battery offers clearly defined installation dimensions and weight information. Verify the available mounting space, battery retention method, connector polarity and electrical requirements of the target platform before installation.
Technical Features & Performance Characteristics
- 4S Series Cell Configuration: Four cells connected in series provide a nominal battery voltage of 14.8V for compatible equipment.
- 1800mAh Rated Capacity: Provides rechargeable energy storage for compatible FPV and RC power systems.
- 200C Stated Discharge Rating: Identifies the specified discharge capability of the battery. Confirm the manufacturer’s continuous and burst rating conditions before determining current limits.
- UPSN Series Battery Design: Intended for performance-oriented FPV and radio-controlled applications.
- Lithium Polymer Construction: Uses rechargeable LiPo battery chemistry for compatible high-performance power applications.
- XT60 Main Discharge Connector: Provides the main power-output interface for equipment fitted with a compatible XT60 connection.
- JST-XH Balance Connector: Provides the balance connection for compatible 4S LiPo charging equipment.
- Compact Battery Dimensions: Measures 85 × 35 × 35mm, supporting installation-space and mounting checks.
- Specified Product Weight: The battery weighs 240g, allowing users to account for battery mass during platform and payload planning.
- FPV and RC Application Suitability: Designed for compatible FPV drones, RC vehicles and other radio-controlled systems.
Performance Advantages
- High Stated Discharge Rating: The 200C specification helps users assess the battery against the power demands of compatible performance-oriented systems, subject to the manufacturer’s rating conditions.
- Defined 4S Voltage Platform: The 14.8V nominal rating makes it suitable for equipment specifically designed for a compatible 4S LiPo supply.
- Rechargeable Energy Storage: The 1800mAh capacity provides a defined energy-storage specification for FPV and RC system planning.
- Dedicated Power and Balance Connections: XT60 and JST-XH connectors provide separate interfaces for main power delivery and cell balancing.
- Installation-Friendly Dimensions: The specified 85 × 35 × 35mm size helps users check physical compatibility with battery compartments and mounting arrangements.
- Known Battery Weight: The 240g product weight supports more accurate platform weight and payload calculations.
Industrial, Commercial & Technical Applications
- FPV Racing Drones: For compatible FPV platforms designed around a 4S, 14.8V LiPo battery supply.
- FPV Drone Systems: For compatible FPV aircraft requiring a battery with the specified capacity and discharge rating.
- RC Cars and Vehicles: For radio-controlled vehicle systems that meet the battery’s electrical and connector requirements.
- RC Airplanes: For compatible aircraft power systems with suitable battery mounting and electrical interfaces.
- RC Helicopters: For compatible helicopter installations designed for a 4S LiPo power source.
- Multirotor Platforms: For compatible multirotor systems with suitable voltage, discharge and battery-space requirements.
- Robotics Systems: For robotic platforms designed to use a compatible 14.8V rechargeable LiPo battery.
Package Contents
- 1 × Bonka 14.8V 1800mAh 200C 4S FPV UPSN Series Racing Lithium Polymer Battery Pack
Product Specifications
| Parameter | Specification |
|---|---|
| Brand | Bonka |
| Series | UPSN Series |
| Battery Type | Lithium Polymer (LiPo) |
| Configuration | 4S (4 Cells in Series) |
| Nominal Voltage | 14.8V |
| Capacity | 1800mAh |
| Discharge Rate | 200C |
| Balance Connector | JST-XH |
| Discharge Connector | XT60 |
| Length | 85mm |
| Width | 35mm |
| Height | 35mm |
| Product Weight | 240g |
| Shipping Weight | 0.26kg |
| Shipping Dimensions | 15 × 5 × 5cm |
Charging, Installation & Operating Recommendations
- Use a Compatible 4S LiPo Charger: Select a charger that supports 4S lithium polymer batteries and the appropriate balance-charging function.
- Connect the Balance Plug Correctly: Align the JST-XH balance connector with the compatible 4S balance port on the charger.
- Verify XT60 Polarity: Check connector polarity and wiring before connecting the battery to the target equipment.
- Check Battery Fitment: Confirm that the 85 × 35 × 35mm battery dimensions fit the intended compartment and that the pack can be securely retained.
- Observe Manufacturer Safety Limits: Follow the specified charging and operating limits. Never charge unattended or use a battery that is damaged, punctured or swollen.
