SPIDER Automation | Bonka 3.7V 2200mAh 25C 1S LiPo Battery | Compact Rechargeable Power with JST Discharge Connector
Product Overview & Battery Technology
The Bonka 3.7V 2200mAh 25C 1S Lithium Polymer Battery Pack is designed to provide rechargeable power for compatible robotics systems, RC platforms and electronic equipment requiring a 3.7V nominal battery supply. Its single-cell configuration makes it suitable for applications specifically designed around a 1S lithium polymer battery.
With a capacity of 2200mAh and a specified 25C discharge rating, this battery provides stored energy for compatible systems requiring responsive power delivery. Actual runtime and operating performance depend on the connected equipment, current consumption, operating conditions and battery condition.
The pack features a JST discharge plug for the main electrical connection and a JST-XH balance connector as specified in the supplied product information. Before charging, verify that the balance connector arrangement is suitable for this single-cell pack and supported by the charger. Confirm connector compatibility and polarity before making any connection.
Measuring 100 × 33 × 7mm, the battery is intended for installations that accommodate its specified dimensions. Check the available battery compartment, connector arrangement and electrical requirements of your equipment before purchase.
Technical Features & Performance Characteristics
- 1S Cell Configuration: Uses a single lithium polymer cell to provide a nominal pack voltage of 3.7V.
- 2200mAh Capacity: Provides stored electrical energy for compatible battery-powered equipment.
- 25C Discharge Rating: Specified discharge rating for applications requiring responsive power delivery. Actual current demand must remain within the battery’s applicable operating limits.
- JST Main Discharge Plug: Provides the primary power connection to equipment with a matching connector and compatible polarity.
- JST-XH Balance Connector: Connector specified in the supplied product information. Confirm its intended arrangement and charger compatibility for this 1S pack before use.
- Compact Battery Dimensions: The 100 × 33 × 7mm form factor helps users verify physical fitment before installation.
- Robotics Power Applications: Suitable for compatible battery-powered robotics systems designed for a 3.7V supply.
- RC & Electronic Equipment: Can be used in compatible RC platforms and electronic systems that support the battery’s voltage, connector and current requirements.
Performance Advantages
- Rechargeable 3.7V Power: Provides a single-cell power source for equipment designed around a 1S LiPo battery.
- 2200mAh Stored Capacity: Offers stored energy for compatible applications, with actual operating time depending on system power consumption.
- Responsive Power Delivery: The specified 25C discharge rating supports compatible applications requiring suitable power output.
- JST Power Connection: The JST discharge plug provides a defined interface for compatible equipment.
- Compact Form Factor: Its specified dimensions support fitment checks for space-constrained battery compartments.
Industrial, Commercial & Technical Applications
- Robotics Systems: For compatible battery-powered robotics applications requiring a 3.7V nominal supply.
- RC Platforms: Suitable for compatible radio-controlled equipment designed for a 1S LiPo battery and matching JST connector.
- Electronic Equipment: Can power compatible electronic systems with appropriate voltage regulation and protection where required.
- Embedded Prototypes: Suitable for compatible battery-powered prototypes designed around the battery’s voltage, dimensions and connector arrangement.
- Portable Power Systems: For compatible equipment requiring a rechargeable 3.7V battery source.
- Custom Battery-Powered Equipment: Can be integrated into systems whose electrical and mechanical requirements match the battery specifications.
Package Contents
- 1 × Bonka 3.7V 2200mAh 25C 1S Lithium Polymer Battery Pack
Product Specifications
| Parameter | Specification |
|---|---|
| Brand | Bonka |
| Battery Type | Lithium Polymer (LiPo) |
| Cell Configuration | 1S (Single Cell) |
| Nominal Voltage | 3.7V |
| Capacity | 2200mAh |
| Discharge Rating | 25C |
| Discharge Connector | JST |
| Balance Connector | JST-XH (as specified) |
| Length | 100mm |
| Width | 33mm |
| Height | 7mm |
| Shipping Weight | 0.085kg |
| Shipping Dimensions | 13 × 5 × 5cm |
Charging, Handling & Operating Recommendations
- Use a Compatible LiPo Charger: Charge the battery using a charger designed for lithium polymer batteries and configured for a 1S pack.
- Verify Balance Connector Requirements: Confirm the JST-XH connector’s intended arrangement for this single-cell battery and ensure the charger explicitly supports it before connecting.
- Check JST Connector Polarity: Verify the discharge plug’s polarity and pin arrangement before connecting it to equipment.
- Confirm Electrical Compatibility: Ensure the connected equipment supports a 3.7V nominal battery supply and has suitable current requirements.
- Inspect Before Use: Do not charge or operate a battery that is swollen, punctured, damaged or showing signs of overheating.
- Supervise Charging: Charge on a suitable non-combustible surface and follow the battery and charger manufacturers’ safety instructions.
- Follow LiPo Storage Practices: Disconnect the battery when not in use and follow appropriate lithium polymer storage and handling recommendations.
