SPIDER Automation | High-Power LED Headlight for Electric Bikes & Scooters | 12V–80V DC, Dual Beam Power & Three Lighting Modes
The SPIDER Automation High-Power LED Headlight is a vehicle lighting assembly designed for electric bikes, electric scooters and other compatible DC-powered vehicles. It combines high-beam and low-beam lighting with an additional strobe mode, providing multiple illumination options within one compact headlight unit.
Designed for a 12V–80V DC input range, the headlight can be integrated into compatible vehicle electrical systems across a broad range of supply voltages. Its dual-power lighting arrangement provides a 20W high-beam mode and a 10W low-beam mode, allowing the rider to select the required lighting level according to the operating environment.
The optical assembly uses LED light sources, a lens and a reflector cup to direct emitted light into a more effective beam pattern. A die-cast aluminium housing provides the main enclosure, while the fixed mounting bracket supports installation on a suitable vehicle mounting point.
Product Overview & Optical Lighting Design
The headlight is designed to improve forward visibility during low-light operation. Its optical arrangement directs light from the LED source through the lens and reflector cup, helping concentrate the emitted light into a useful forward beam rather than allowing it to disperse inefficiently.
The assembly provides separate high-beam and low-beam power modes. This allows the user to select between a higher-output lighting mode and a lower-power illumination mode. An additional strobe function provides a flashing light pattern as part of the three-mode operating arrangement.
Technical Features & Functional Characteristics
- Wide DC Voltage Compatibility: Designed for DC electrical systems within the specified 12V–80V input range, supporting use across compatible electric vehicle platforms.
- Dual-Power Beam Configuration: Provides separate high-beam and low-beam lighting modes with different power levels.
- Three Lighting Modes: Offers high-intensity illumination, softer illumination and flashing strobe operation.
- LED Light Source: Uses LED lamp elements as the primary source of illumination.
- Lens and Reflector Cup: Directs light through the optical assembly to form a more controlled forward beam.
- Die-Cast Aluminium Construction: Provides a rigid metal housing for the headlight assembly.
- Fixed Bracket Installation: Includes a mounting bracket and screw-based fixing arrangement for securing the light.
- Polarity-Based DC Wiring: Connects through positive and negative power terminals for operation from a compatible DC supply.
- Multiple Colour Choices: Available colour options are listed as red, blue, black and gold.
High-Beam & Low-Beam Lighting Operation
The headlight provides two primary illumination levels to suit different lighting requirements:
- High-Beam Mode – 20W: Uses the higher-power lighting setting to provide stronger forward illumination when greater visibility is required.
- Low-Beam Mode – 10W: Uses the lower-power setting for reduced illumination compared with the high-beam mode.
The actual road coverage, beam distance and light intensity depend on the optical design, installation angle and vehicle mounting position. No lumen output, beam-distance measurement or photometric distribution is specified for this model.
Three-Mode Lighting Control
The headlight includes three selectable lighting modes. The supplied operating description identifies the following sequence:
- Mode 1 – High-Intensity Light: Provides the higher-output illumination setting.
- Mode 2 – Soft Light: Provides the lower-intensity lighting setting.
- Mode 3 – Strobe: Produces a flashing light pattern.
The mode description indicates that the lighting setting changes through successive switching operations. The exact switching hardware and timing behaviour are not defined in the available product information.
Optical Lens & Reflector Construction
The headlight uses an optical assembly consisting of LED light elements, a lens and a reflector cup. The lens directs light through the optical structure, while the reflector arrangement helps guide the emitted light towards the front of the vehicle.
This optical arrangement is intended to improve the utilisation and direction of the emitted light. Actual illumination performance will depend on the installed orientation and the optical characteristics of the complete assembly.
Die-Cast Aluminium Housing & Mounting Arrangement
The main headlight enclosure is constructed from die-cast aluminium. This metal housing forms the structural body around the lighting components and optical assembly.
The product includes a fixed mounting bracket. Installation is carried out by positioning the bracket at a suitable vehicle mounting point and securing it with the provided screw-based arrangement. The mounting position should allow the beam to face forward without obstruction.
Listed colour choices include red, blue, black and gold. These refer to the available product colour options; the exact finish and colour of individual components may depend on the selected variant.
Electrical Connection & Power Requirements
The headlight is designed for a 12V–80V DC supply and uses positive and negative power connections. The supply voltage must remain within the specified input range for the headlight to operate as intended.
Correct polarity is important when connecting the unit. The positive and negative leads should be identified from the actual product wiring before connection to the vehicle supply. The supplied information does not identify wire colours, connector type, fuse requirement or current consumption at individual input voltages.
Applications
This LED headlight can be used in compatible DC-powered vehicles where an auxiliary or replacement headlight with selectable lighting modes is required.
- Electric Bicycles: Provides forward LED illumination for compatible e-bike electrical systems operating within the supported DC input range.
- Electric Scooters: Serves as a headlight option for compatible electric scooters requiring a DC-powered lighting assembly.
- Electric Motorcycles: Can be integrated into suitable electric motorcycle lighting systems with compatible supply voltage and mounting arrangements.
- All-Terrain Vehicles (ATVs): Provides auxiliary forward lighting for compatible ATV installations.
- Electric Buggies: Offers a multi-mode headlight option for compatible electric buggy platforms.
- Electric Tricycles: Supports forward illumination on compatible electric three-wheel vehicles.
- Electric Rickshaws: Can be considered for electric rickshaw lighting upgrades where the electrical supply and mounting arrangement match.
- Electric Utility Carts: Provides a compact lighting solution for compatible three- and four-wheel electric carts.
- Custom Electric Vehicle Builds: Can be incorporated into custom electric mobility projects requiring a wide-voltage DC headlight.
- Auxiliary Vehicle Lighting: Can be used as an additional forward-facing light where the vehicle electrical system and installation position are suitable.
Package Includes
- 1 × High-Power LED Headlight
Product Specifications
| Parameter | Specification |
|---|---|
| Product Type | High-Power LED Headlight |
| Product Category | Electric Vehicle Lighting / Headlight Assembly |
| Intended Vehicle Types | Electric bikes, electric scooters and other compatible DC-powered vehicles |
| Operating Supply Type | DC |
| Input Voltage Range | 12V–80V DC |
| High-Beam Power | 20W |
| Low-Beam Power | 10W |
| Primary Light Source | LED lamp elements |
| Lighting Functions | High beam, low beam and strobe |
| Lighting Mode Count | 3 modes |
| Mode Switching | Successive switching through high-intensity light, soft light and strobe modes |
| Optical Components | LED light elements, lens and reflector cup |
| Housing Material | Die-cast aluminium |
| Mounting Arrangement | Fixed mounting bracket with screw-based installation |
| Available Colour Options | Red, blue, black and gold |
| Power Connection | Positive and negative DC connections |
| Listed Service Life | 30,000 hours |
| Package Quantity | 1 headlight assembly |
Installation & Operating Recommendations
Install the headlight on a stable vehicle mounting point and connect it to a compatible DC supply within its specified input range. Correct polarity, secure mounting and suitable beam alignment are important for dependable lighting operation.
- Match the Supply Voltage: Confirm that the vehicle’s DC supply falls within the 12V–80V input range before connecting the headlight.
- Observe DC Polarity: Identify the positive and negative leads before connection. Reversing polarity may prevent correct operation or damage the lighting electronics.
- Use a Suitable Electrical Circuit: Connect the headlight through a suitably rated vehicle lighting circuit and wiring arrangement. Select appropriate wiring and circuit protection for the installation.
- Secure the Mounting Bracket: Fix the bracket firmly to a suitable mounting point and ensure that vibration or vehicle movement cannot loosen the assembly.
- Align the Beam: Position the headlight so that the forward beam provides useful road illumination without being aimed unnecessarily high towards other road users.
- Check Mode Operation: Test the high-beam, low-beam and strobe modes after installation to confirm that the switching sequence operates correctly.
- Protect the Wiring: Route the positive and negative leads away from sharp edges, hot surfaces and moving components. Secure connections against loosening.
- Verify Vehicle Lighting Regulations: Use the appropriate steady-beam lighting mode for road operation and follow applicable local requirements for vehicle headlights and flashing lights.
