SPIDER Automation | 0802SE 19500KV Brushless Whoop Drone Motor – 1S LiPo, 1.8g | Lightweight Propulsion & Repair-Friendly Wiring
Product Overview & Motor Design
The 0802SE 19500KV Brushless Motor is a lightweight propulsion component developed for compact 1S whoop drone systems. With an individual weight of approximately 1.8g, it is intended for weight-sensitive 65mm brushless whoop drone configurations where motor weight and overall flight characteristics are important considerations.
The 2022 version features an updated motor appearance and a compact 0802SE construction. Its 19500KV rating is specified for compatible 1S LiPo-powered drone applications. The motor design focuses on dynamic balance, responsiveness and a combination of power and thrust suited to small-format drone platforms.
For improved repair convenience, the motor’s lead wires are soldered directly to the PCB. This construction allows the wire connection to be repaired if it becomes disconnected. The motor is supplied with 35mm-long 30AWG cables, a 1mm shaft diameter and brass bushings.
The supplied specification identifies the motor colour as Ice Blue. Its M1.4 mounting compatibility makes it suitable for installation in frames designed for the corresponding motor mounting arrangement.
Technical Features & Performance Characteristics
- 0802SE Brushless Motor: Compact motor configuration designed for small 1S whoop drone propulsion systems.
- 19500KV Motor Rating: Specified KV rating for compatible 1S LiPo-powered drone applications.
- 2022 Version Design: Updated motor appearance as described in the supplied product information.
- 1.8g Individual Weight: Lightweight construction intended for weight-sensitive 65mm brushless whoop drone builds.
- Dynamic Balance: Designed to provide balanced motor operation and responsive flight characteristics.
- PCB-Soldered Lead Wires: Motor lead wires are soldered directly to the PCB, allowing easier repair if a wire becomes disconnected.
- 30AWG Motor Cables: Supplied with 30AWG lead wires measuring 35mm in length.
- 1mm Shaft Diameter: Shaft dimensions specified for compatible propeller and motor assemblies.
- 5mm Shaft Length: Provides the specified shaft length for supported installation configurations.
- Brass Bushings: Uses brass bushings as the specified bearing arrangement.
- M1.4 Mounting Compatibility: Mounting-hole specification uses M1.4 hardware.
- Ice Blue Colour: Colour identified in the supplied technical specification.
Performance Advantages
- Reduced Component Weight: The 1.8g individual motor weight helps keep the propulsion assembly lightweight.
- Responsive Flight Characteristics: The motor is designed around dynamic balance for flexibility in compatible small-format drone systems.
- 1S System Compatibility: The specified input voltage makes it suitable for compatible 1S LiPo whoop drone configurations.
- Repair-Friendly Wiring: PCB-soldered lead wires allow reconnection and repair if a wire becomes detached.
- Compact Installation: The 0802SE configuration and M1.4 mounting specification support compatible compact drone frames.
- Four-Motor Package: The supplied set contains four motors for multi-motor drone assemblies.
Drone & Embedded Propulsion Applications
- 65mm Brushless Whoop Drones: Propulsion integration in compatible 65mm whoop drone frames.
- 1S FPV Drone Systems: Motor installation in compatible 1S LiPo-powered FPV platforms.
- Compact Multirotor Builds: Use in supported small-format multirotor propulsion assemblies.
- Drone Motor Replacement: Replacement of damaged or worn motors in compatible drone systems.
- Drone Maintenance & Repair: Servicing of motor wiring and replacement of individual propulsion components.
- Weight-Sensitive Drone Configurations: Applications where low motor weight is an important design consideration.
Package Contents
- 4 × 0802SE 19500KV Brushless Motors
- 1 × Pack of M1.4 × 3mm Screws
Product Specifications
| Parameter | Specification |
|---|---|
| Product Type | Brushless Motor |
| Motor Model | 0802SE |
| Version | 2022 Version |
| Motor KV | 19500KV |
| Input Voltage | 1S LiPo |
| Individual Motor Weight | 1.8g/pc |
| Colour | Ice Blue (as specified in the technical specification) |
| Shaft Diameter | 1mm |
| Shaft Length | 5mm |
| Motor Mount Hole Specification | M1.4 |
| Cable Length | 35mm |
| Wire Gauge | 30AWG |
| Bearing Type | Brass Bushings |
| Compatible Drone Frame | 65mm Brushless Whoop Drone Frame (as described) |
| Package Quantity | 4 Motors |
| Included Mounting Hardware | 1 Pack of M1.4 × 3mm Screws |
| Shipping Weight | 0.02kg |
| Shipping Dimensions | 6 × 6 × 2cm |
