SPIDER Automation 10-Pin Alligator Clip to Male Dupont Jumper Wire Cable Set (20cm) | Pure Copper Crocodile Test Leads
The SPIDER Automation 10-Pin Alligator Clip to Male Dupont Jumper Wire Cable Set is an indispensable bench accessory designed for electronics hobbyists, engineering students, lab technicians, and makers working with microcontrollers, solderless breadboards, and experimental circuits. When testing electronic prototypes, connecting standard breadboard sockets to loose component leads, sensors, motor terminals, or power supplies can be frustrating and unreliable using standard jumper wires. This hybrid ribbon cable solves that challenge by combining spring-loaded alligator crocodile clips on one end with standard male Dupont pin connectors on the other.
Constructed using high-purity pure copper wire for superior electrical conductivity, the 10-pin ribbon harness measures 20 cm in length. Each alligator clip is outfitted with a 22.6mm metal jaw covered by a soft, color-coded plastic insulation boot in five distinct color pairs (Red, Black, Yellow, Blue, and White). This color-coding allows users to easily distinguish power, ground, and signal lines, preventing accidental short circuits or crossed wiring during active testing. Whether plugged directly into breadboards for school physics experiments, used with digital multimeters, or acting as miniature clamps to hold delicate parts during soldering, the SPIDER Automation alligator male Dupont cable provides unmatched utility and safety.
Pure Copper Conductivity & Insulated Crocodile Jaw Design
The core electrical advantage of the SPIDER Automation Jumper Cable Set lies in its pure copper conductor strands. Unlike cheap copper-clad aluminum (CCA) alternatives, pure copper minimizes signal degradation and electrical voltage drop, ensuring accurate test measurements and reliable power delivery to sensitive electronic modules.
The 22.6mm metal alligator clips feature strong internal spring jaws that bite securely onto component leads, battery terminals, and bare wire ends. Each clip is fully encased in a flexible plastic insulation sleeve that protects against accidental finger contact and prevents adjacent clips from shorting against each other in cramped experimental setups.
Technical Features & Functional Characteristics
- Hybrid Alligator-to-Male Dupont Architecture: Combines spring-loaded crocodile clips on one end with male pin connectors on the other.
- High-Purity Pure Copper Core: Premium copper strands ensure low electrical resistance, high current transfer, and accurate test readings.
- 5-Color Insulated Boot Coding: Supplied in Red, Black, Yellow, Blue, and White paired colors with soft protective plastic covers.
- Organized 10-Pin Ribbon Format: Ribbonized cable design prevents messy wire tangling and allows easy peeling for individual routing.
- Optimized 20 cm Cable Length: Perfect balance of reach and neatness for benchtop testing and breadboard prototyping.
- Versatile Miniature Clamp Function: Strong clip spring tension doubles as a miniature clamp for holding wires during soldering or gluing.
System Compatibility & Bench Applications
The SPIDER Automation Alligator Male Dupont Jumper Set is designed for universal compatibility across electronic prototyping hardware:
- Solderless Breadboards: Male Dupont pins insert smoothly into standard 0.1-inch pitch breadboard holes for rapid circuit assembly.
- Microcontroller Development Boards: Connects easily to female headers on Arduino Uno, Mega, Nano, Raspberry Pi, ESP32, and STM32 boards.
- Electronic Sensors & Modules: Bridges loose sensor leads, relay modules, and battery terminals directly to breadboard rails.
- Educational Physics Laboratories: Ideal for students quickly and safely assembling temporary circuits in school science experiments.
- Workbench Assembly & Soldering: Acts as a temporary third hand to clamp wires together or hold small components in place prior to soldering.
Package Includes
- 1 × 10-Pin Alligator Clips to Male Dupont Jumper Wire Cable Set (20 cm Ribbon)
Comprehensive Product Specifications
| Parameter | Specification Details |
|---|---|
| Product Category | Electronics Accessory / Prototyping Test Lead Ribbon Cable |
| Item Type | Alligator Clip to Male Dupont Jumper Wire |
| Conductor Material | High-Conductivity Pure Copper Wire Strands |
| Connector Types | Male Dupont Pin Connector (One End) & Alligator Crocodile Clip (Other End) |
| Wire Color Coding | Red, Black, Yellow, Blue, White (Paired Insulation Covers) |
| Individual Cable Length | 20 cm (0.2 Meters) |
| Alligator Clip Length | 22.6 mm Metal Jaw Length |
| Insulation Protection | Soft Plastic Color-Coded Boots on Alligator Clips |
| Operating Temperature Range | -10°C to +70°C Indoor Environmental Tolerance |
| Unit Net Weight | Approx. 35 g |
| Gross Shipping Weight | 0.040 kg (40 grams) |
| Shipping Package Dimensions (L × W × H) | 7 cm × 4 cm × 2 cm |
Usage & Handling Guidelines
Follow these best practices when utilizing your alligator-to-male Dupont jumper cables:
- Ribbon Separation: Gently pull individual wires apart from the 10-pin ribbon strip if you need single test leads, or keep them bundled for tidy multi-wire routing.
- Secure Clamping: Press open the insulated alligator clip jaws and clamp them firmly onto component leads or terminals, ensuring the metal teeth make solid electrical contact.
- Pin Insertion: Push the male Dupont connector pins straight into solderless breadboard holes or female header sockets without bending the contact pins.
- Short-Circuit Prevention: Utilize the color-coded plastic boots to keep alligator clips separated, ensuring metal jaws do not touch and cause unintended electrical shorts.
